Order Online or Call Us! (754) 336-7424 · Text us
Standalone Pilates Cadillac vs Reformer Combo: Which Should You Buy?
Choose a standalone Pilates Cadillac if you already have a reformer and want a separate trapeze table ready to use. Choose a Cadillac reformer combo if you need both a moving carriage and a full overhead frame, but can dedicate only one station and use the two setups at different times. The deciding factor is often what happens between sessions: can you leave the table ready, or will someone need to convert it before the next appointment?
What changes when a Cadillac shares a reformer station?
A standalone Cadillac, also called a trapeze table, has a fixed padded surface and a full overhead frame for the apparatus’s bars, straps and springs. A Cadillac reformer combo combines a sliding reformer carriage with a full trapeze frame. A mat conversion is a set of fitted pads that provides a stationary working surface for the appropriate table exercises on a compatible combo.
Both BASI Systems models below have a full overhead frame. This is a choice between two ways to organize that equipment, not a choice between an overhead frame and an upright tower at one end. If you are still deciding whether your programming needs an overhead frame, start with our Cadillac reformer combo versus tower guide.
How do the two BASI Systems packages compare?
The standard-length versions have the same listed length and width with the trapeze attached. The standalone Cadillac is taller, while the combo adds the reformer carriage and conversion equipment. Neither set of dimensions describes the full area needed to work around the station.
| Buying detail | Cadillac Trapeze Table | Reformer Combo |
|---|---|---|
| Working surface | Fixed padded table; no reformer carriage | Moving carriage with included Twin Mat Conversion for stationary work |
| With trapeze, L × W × H | 107.3 × 28.5 × 87.2 in | 107.3 × 28.5 × 76.7 in |
| Selected included equipment | Trapeze frame, swing, roll-down bar, push-through bar and 12 trapeze springs | Trapeze frame, swing, roll-down bar, push-through bar and 12 trapeze springs, plus five reformer springs, twin mats and a foot platform |
| Listed product price | $7,500–$7,800 | $11,750–$11,950 |
See the BASI Systems Cadillac Trapeze Table and BASI Systems Reformer Combo for the current listings. BASI publishes separate Cadillac dimensions and equipment specifications and Reformer Combo dimensions and equipment specifications. These are selected package details, not complete delivered quotes. Confirm the exact frame length, leg configuration, accessories and delivery services in writing.
Can one station cover a full teaching day?
Yes, if the two formats are used in sequence and your schedule leaves time for the changeover. No, if two people need separate equipment at the same time and the combo would be your only reformer and your only Cadillac.
Test your busiest hour, not your average day. For example, if you teach a Cadillac private while a second instructor needs a reformer, a combo cannot serve both appointments. If you teach one client at a time and your Cadillac work follows a reformer lesson, a combo may work well. Have an instructor demonstrate the entire changeover on the exact model and time the reset yourself. Include putting the panels away and restoring the first setup, not just fitting the mats. That gives you a realistic gap to plan between bookings without assuming a universal conversion time.
At home, ask the same question on a smaller scale. If you alternate formats on different days, a one-station setup may be convenient. If you already have a reformer you like and expect to use the Cadillac frequently, compare adding the fixed table against replacing a machine that already suits your lessons.
What should you check before ordering?
- Check your schedule. Write down when each apparatus is needed. Mark any overlapping appointments and who will reset the station.
- Check two kinds of clearance. Measure from the floor to the lowest obstruction, then confirm space for assembly, moving parts and the intended instruction. An unobstructed 96-inch ceiling leaves 8.8 inches above the listed Cadillac frame or 19.3 inches above the combo frame. Those numbers are static gaps, not required or recommended working clearances.
- Give conversion parts a home. Ask where each loose part goes in both modes. Check that your proposed storage spot does not block an approach or walkway.
- Compare like-for-like quotes. If you need two independent stations, price a Cadillac plus a reformer, not a Cadillac alone versus a combo. Separate equipment, delivery placement and assembly. Ask for packaged dimensions and the manufacturer’s setup instructions before arranging freight.
BASI’s equipment manuals and assembly videos are the reference for setup and checks. Learn the conversion and spring-loaded bar procedures from the current guide and an instructor familiar with the apparatus.
Frequently asked questions
Can a standalone Cadillac replace a reformer?
No. It does not have a moving carriage. If your instruction requires carriage movement and you do not already have a reformer, plan for a separate reformer or a compatible combination machine.
Does the shorter overhead frame make the combo a better fit?
Not on its own. The BASI combo’s listed assembled height is lower than the standalone Cadillac’s, but both require verification of working and assembly clearance. Also confirm the height and reach your instructor needs for the planned setup.
Browse our Cadillac tables and reformer combos, or contact Reformer Supply with the equipment you already own, the lowest ceiling obstruction, the sessions you plan to teach and your ZIP code. Those details make it easier to compare a one-station quote with a two-station plan.